EMSCAN develops real-time systems for electromagnetic field and antenna parameters measurements. In this space, EMSCAN has been rapidly gaining market share for last 7 years. To meet testing needs of emerging technologies like 5G and IoT, EMSCAN is looking for bright minds to help build new breed of high frequency leading edge real-time measurement system.
The Senior Firmware Engineer will design and code and test for embedded systems, develop drivers and other tools.
Proficiency in C, C++, embedded C, Java script and .NET.
Debug embedded systems using software and hardware test tools like oscilloscope and logic analyzers.
Test release candidate software/firmware and create software tools.
Creation of firmware architecture and design documentation and hold reviews with peers and managers.
Collaborate with a multidisciplinary highly skilled group of engineers.
Advise management on project planning, schedule, risks and deliverable deadlines.
Research new software testing methods, coding standards and best practices to enhance EMSCAN products functionality and quality.
Support customer service requests, requests from sales reps, and R&D engineers.
Develop understanding of customer perspective and make product quality a top priority.
Bachelor’s degree in Computer Science, Computer Engineering or Electrical Engineering.
5+ years of experience developing embedded firmware and Windows based software.
Experience with embedded platforms such as Vybrid, PIC, and MSP430 or similar systems required.
Demonstrated experience in writing code according to a coding standard.
Ability to prioritize multiple tasks when facing a tight deadline
Excellent communication and interpersonal skills within a team environment
EMSCAN is a growing company where you will have the opportunity you to participate in many other areas of the business allowing you to expand your skill set. The working hours will be determined by your productivity, multi-tasking ability and workload. This is a full-time position that can start immediately once we find the right candidate.
“I’m an electronics technician with 30 plus years in the automotive electronics field. We could not afford to spend a lot of time and money at the end of the development cycle trying to fix EMC failures, especially at the expensive certified EMC labs that we used for final compliance testing. Our in house EMC lab was used for pre-compliance testing, we were not certified. For susceptibility testing we did: strip line, TEM cell, tri-plate and bulk current injection. This is where EMxpert comes in. When you’re doing susceptibility testing and there is an anomaly, it may not be apparent as to what part of the circuit is malfunctioning. For EMC, it is all about the up-front work that is done. Board layout and pre-compliance testing are very important. The farther into the design cycle you are, the more it will cost you to resolve it. If I had to describe EMxpert in one word it would be “up-front”.
It’s like your headlights in the dark.”
“I prefer to use the RFxpert for my antenna design projects instead of simulation software. In a couple of hours, I can model a real antenna out of copper and test it with the RFxpert in the antenna’s intended operating environment. I then use the proven design, based on the RFxpert analysis, to prepare a CAD drawing and send it off to manufacturing for prototyping.”
Jorge I. Ortiz
RF Network & Antenna Engineer, Independent Consultant at Mueller Systems Ocala, Florida Area
“I was very impressed with the capability of the EMxpert solution. We had spent several weeks investigating EMC issues related to our end customers product. We had information relating to the spectral component and amplitudes that were causing an issue, but needed to identify the location of the emission site. The EMxpert tool allowed us to perform spatial analysis and locate the site in a single day. The tool is effective and can save weeks of time and effort!”
Semtech Director of Applications Support
“We're impressed with the accuracy of the RFX scanner compared to our external lab measurements for TRP.”
“Where have you guys been for the last 5 years while we have struggled?” was the concluding comment from Robert… “We need one of these” was Robert’s conclusion.”
Senior Design Engineer - EMI
“We wanted to extend the distance between the hand-held transmitter and the aerial device. Initially we thought that we had to add an additional power amplifier stage. The RFxpert showed us that the real problem was something else: the coax was radiating as much as the antenna. By using better coax and a different coupling method from the final power amplifier stage to the antenna, we were able to transfer more power to the antenna. We managed this significant increase by almost zero cost to the design.”
Director of Engineering
Consumer Electronics Manufacturer
“I was very impressed with the capability of the EMxpert. The EMxpert tool allowed us to perform spatial analysis and locate the site in a single day. The tool is effective and can save weeks of time and effort!”
Director of Applications Support
Leading Semiconductor Manufacturer
“Designers now evaluate designs in real-time vs. waiting at the back of the queue with $100M+ projects in front”
RF Design Engineer
Leading Military Subcontractor
“We were able to go from CISPR 25 Class 2 to Class 5 in just a few weeks, instead of months.”