Supported Network Analyzers

Below is a list of network analyzers that can be configured with and are supported by RFxpert. If your network analyzer is not listed, contact us.

HP
Model HP 8722ES
Firmware: HP8722ES.07.74
Options: OPTS 105 010 012 400
Connection: GPIB

Model HP 8714ES/ED
Firmware: E.06.02
Connection: GPIB

Model HP 8753ES
Connection: GPIB

Agilent
Model E5071C
Firmware: A.08.12
Connection: GPIB/LAN

Model N9912A
Firmware: Rev.A.05.19
Options: 106 (6GHz antenna analyzer)
Options: 303 (Network analysis capability)
Connection: LAN

Model E506XA
Firmware: Rev.A.03.01
Connection: GPIB/LAN
Note: E5062A tested

Model E836XC
Firmware: Rev.A.09.33.09
Connection: GPIB/LAN
Note: E8361C tested

Model E836XB
Firmware: Rev.A.07.50.09
Connection: GPIB/LAN
Note: E8362B tested
VNA setup requirements:
***1. Go to System, Configure, SICL/GPIB/SCPI set SICL to enable
***2. Check mark "Automatically Enable on Start up"
***3. Check mark "LAN and Sockets/Telnet"

Rohde & Schwarz
Model FSH 4/8
Options: FSH.28 (8GHz with VSWR bridge) or FSH.24 (4GHz with VSWR bridge)
Options: FSH-K42 (Vector reflection measurements)
Options: FSH-K40 (USB or LAN interface)
Connection: LAN

Model ZVL
Firmware: Rev.3.10
Connection: LAN

Model ZVBXX
Firmware: Rev.2.81
Connection: GPIB/LAN
Note: ZVB20 tested