EMSCAN Home x

Real-time answers to technical questions

Download Printable Product Brochure

Download Printable Applications Report

Download Presentation about "EMxpert validates EMC simulation" (Japanese)

Download Presentation about "New EMC Simulation Algorithm Validated by EMxpert"

Download Case Study about "Serializer/Deserializer (SERDES)" by National Semiconductor / Texas Instruments

Download Case Study about "Spread Spectrum Clock Generation (SSCG)" by National Semiconductor / Texas Instruments

NEW! Download Case Study about "Reducing Time on Debugging Boards and Improving Design Yield"

Published papers:

Download the paper about "Analyse and research of radiated emission on PCBs"
This paper presents a study of radiated emission's mechanism and radiated electromagnetic field estimation. This paper was published in the International Conference on Electronics, Communications and Control (ICECC), 2011.

Download the paper about "Optimization of Detection Strategy in Electronics Assembly"
The purpose of this paper is to improve the quality and efficiency of the high-density electronic circuit module. This paper was published in the International Forum on Information Technology and Applications (IFITA), 2010.

Download the paper about "EMC Study and Testing of the Vehicle Management System in Clean Energy Automotive"
The purpose of this paper is to get the veracity and repeatability of the testing results, and then to study the theory of RFI/EMI to resolve the interference resource and cut the interfering path. This paper was published in the Vehicle Power and Propulsion Conference, 2008.

Download the paper about "Investigation of Conducted Immunity and Spatial Distribution of RF Currents for a 2-Sided PCB"
This paper presents a study of influence of the RF noise in automotive 12-volts power distribution network and its impact on electronic control unit. This paper was published in the IEEE International Symposium on Electromagnetic Compatibility, 2008.

Download the paper about "Current Density Measurements in Conductive Polymer Coated Surfaces"
This paper attempts to find out whether the use of conductive polymer coatings would be of benefit in automotive EMC applications where the relatively low cost, versus multi-layer PCB solutions, makes the polymer an attractive alternative. This paper was published in the IEEE International Symposium on Electromagnetic Compatibility, 1998.

Download the paper about "Predicting EMI Emission Levels Using EMSCAN"
This paper attempts to find out whether the data from the EMSCAN can be used to predict the electric field strength from that PCB. This paper was published in the IEEE International Symposium on Electromagnetic Compatibility, 1993.